Ball Mill(dry or wet)
Usage:Ball Millis widely used in manufacture industries, such as cement, silicate, new building materials, refractory materials, fertilizer, Ball Mill run of ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet pulverization for all kinds of ores and other grindable materials. dry pulverization is suitable for refractory materials, cement, fertilizer, glass industries; and wet pulverization is suitable for Ball Mill run, ceramics, and chemical industries.
The Ball Millis a horizontal rotary drum apparatus driving by gears outside. It is a lattice pattern with two storage cells. The raw materials enter into the first cell of the Ball Millevenly through the quill shaft in charging part.
There are step liner palates or wave liner palates in the first cell which has been loaded various steel spheres of different scales. When rotating, the drum causes centrifugal force that brings the steel spheres to a certain height and then the spheres drop to impact and grind the materials. After the rough grinding in the first cell, the qualified partials will enter into the second cell through a single division plate .There are flat palates welded on the inner wall of the second cell, as well as steel spheres. The materials will be further grinded in it and at last the qualified granularities will be discharged through the unload part. Then the whole process is completed.
The Ball Millconsists charging part, discharging part, rotary part, transmission part (velocity decreasing machine, small conveying gear, motor, electric control) and so on. The quill shaft is made of casting steel and the inner liner palate is replaceable. The big rotary gear is processed by cast roll tooth. There is wear- resistant liner palates welded on the inner wall of the drum so that it has good wear proof ability. The Ball Milloperates stably and reliably.
It can be divided into dry Ball Milland wet Ball Millwith lattice according to the materials and discharging way.